Using homemade disinfectants can be an efficient and effortless way to clean bathroom windows.
Follow these tips.
The bathroom has long since ceased to be a neglected space in the house. On the contrary, it has become a major concern, especially since it’s the preferred place not only for personal hygiene but also for relaxation for every member of the family. Hence, the importance of keeping it in top condition.
If you don’t know how to clean your bathroom windows and leave them sparkling clean, Homecenter will show you.
1. Clean the bathroom windows with homemade disinfectants
Of course, bathroom glass can be cleaned with commercial products; however, there are other options. Specifically, we recommend two:
– With baking soda: If you’ve wondered how to clean bathroom windows with limescale buildup, baking soda might be the best solution. Add it to a cup of water until you have a thick paste. When applying it to the windows, you’ll need to leave it on for a while.
– With vinegar: You can apply vinegar directly to the windows or mix it with water in a spray bottle. You can also use it along with a commercial cleaner. Either way works. If you want to clean bathroom windows and get rid of mold, vinegar (a natural disinfectant) is one of the most effective options.
2. Start cleaning the bathroom windows after showering with hot water.
We know you’ve wondered more than once how to clean your bathroom windows. What you might not know is that doing this after showering is highly recommended.
The steam from the hot water softens the mold and limescale that has built up on your bathroom windows, which is why it’s best to clean them after a shower. First, wipe the surface with a dry cloth to remove any condensation, and then apply any of the cleaning mixtures.
If your cleaner is vinegar-based, use a spray bottle to apply it to every corner of the glass you want to clean. If you chose the baking soda mixture, take a section of the glass and wipe it from left to right until the entire surface is covered with the resulting white paste.
3. Rub slowly but firmly; this is the key if you don’t know how to clean bathroom windows.
Once you’ve applied the mixture to the glass, simply rub it evenly from top to bottom. You can start on the outside of the glass and work your way inwards.
Don’t forget to clean the area where the glass panels overlap on your shower enclosure doors, as this is probably where the most grime accumulates. If you want to rub more than once, wash the sponge thoroughly; otherwise, you’ll just spread the dirt around.
Disinfecting the bathroom glass also requires cleaning the tracks on which the doors slide. How do you do this? Scrub them. Use the same sponge and the same cleaning solution.
4. How to deep clean bathroom windows? Use a toothbrush
If you’re going to do something, do it right or don’t do it at all. This applies to everything, even cleaning your bathroom windows.
There are areas a sponge simply can’t reach, like the corners of the glass, the edges of the shower tracks, and where the glass panels overlap in the shower stall. For these spots, the best advice is to use a toothbrush.
We know that cleaning with a toothbrush can be tedious, but it will guarantee that your bathroom windows are thoroughly cleaned and that germs that accumulate in the corners of the shower stall won’t spread. Remember that you can also use this same tool to clean the tiles.
5. Rinse, the last step in cleaning bathroom glass
Once you’ve scrubbed the glass, the last step is to rinse it so it shines like new. Here’s a tip: wait about 15 minutes after scrubbing to rinse it.
You can use a sponge or a washcloth to rinse the bathroom glass, but be careful not to over-wet it. Then, rub it with a dry towel to finish the process.
If you want the glass to be even shinier than usual, you can take newspaper and rub it in a circular motion from top to bottom and from the outside to the inside. You’ll be amazed by the results.
Did you enjoy this article on how to clean your bathroom windows? Stay tuned to our Projects and Ideas section.